You may need to make sure you have a connection between your PC and our mainframe. It could be a problem if you connect from office, as some of your firewall may block outbound telnet.
In most case, it should be fine to connect to our mainframe from your home PC.
Could you try following commands to verify it?
1. From your PC, open command prompt (DOS window), and enter following FTP command to see if you get connected:
- Code: Select all
ftp zos.efglobe.com
2. From your PC, open command prompt (DOS window), and enter following telnet command to see if you get connected:
- Code: Select all
telnet zos.efglobe.com
And simply press Enter key to see if you get IKJ* messages.
If you could connect to our mainframe, you may then try another TN3270 emulator:
viewtopic.php?f=5&t=49